10 Best Amp for MTX Terminator Subs [Reviewed in 2022]

MTX Terminator subs are some of the best on the market, and when paired with the right amp they can really deliver.

So what’s the best amp for MTX Terminators?

Best Amp for MTX Terminator Subs

In this post, we’ll take a look at some of the best amps for these subs and help you figure out which one is right for you.

Whether you’re looking for something powerful, affordable, or versatile, we’ve got you covered! Keep reading to learn more.

NAME

IMAGE

OUR RATING

PRICE

Kicker 43CXA3001 600W MONO Class D Power Car Audio Amplifier

9.8/10

MTX Audio THUNDER500.1 Thunder Series Car Amplifier

9.7/10

Sound Storm EV2500M Evolution 2500W, 2Ohm Stable Class A/B Amplifier

9.6/10

Our 10 Best Amp for MTX Terminator Subs:

1. Kicker 43CXA3001 600W MONO Class D Power Car Audio Amplifier CXA300.1

The Kicker 43CXA3001 is a portable but powerful amp for MTX terminator subs. It weighs less than 5lbs. yet offers about 12dB of extra sound. It doesn’t only have a fine quality exterior but the internal system is also amazing.

This is a Mono Class D power plant amp that produces a total peak power of 600W – a 150W RMS at 4 Ohms and a 300W RMS at 2 Ohms. It comes with Preamp RCA outputs to connect to multiple amps and offers a KickEQ variable bass boost. A high-quality gauge wire is enough to ground the Kicker 43CXA3001.

If you need a powerful amp to complete your audio system for a powerful bass response or to connect with other bass amps for greater sound quality, the Kicker 43CXA3001 is your best choice.

Benefits:

  • It is a portable yet powerful amp
  • It is relatively affordable
  • It comes with Preamp RCA outputs to connect with multiple amps
  • It features high- and low-level inputs
  • It is easy to install
  • It has a soft start turn-on

Drawbacks:

  • It lacks remote gain
  • It may heat up if there is a wrong connection
CHECK PRICE ON AMAZON

2. MTX Audio THUNDER500.1 Thunder Series Car Amplifier

This is one of the most compact amps for MTX Terminator Subs on the marketplace. It’s not surprising to expect this Class D amp to fit perfectly well with the MTX Terminator Sub because they are of the same brand. It comes in a small, compact but durable construction.

This monoblock amp has a 500W RMS, which is enough to power up your sub. The circuit board has a surface-mounted print design, which doesn’t only make all the parts of the amp resistant to vibrations but also enables the amp to operate for a longer time.

Other amazing features that come with the MTX Audio THUNDER500.1 include a low pass filter (LPF) to take out frequencies within the range of 40Hz to 220Hz; a remote gain control function; an in-built subsonic filter that can be tuned from OFF to 50Hz., and a bass boost switch to boost the bass output at 0dB, 6dB, and 12dB.

All of these amazing features work together for more customization to improve your sub’s power and hone the sound it produces. You’ll surely find the quality of this amp to be acceptable.

Benefits:

  • It is a small-sized powerful Class D amplifier
  • It has a remote gain control function
  • It has a protect mode
  • It has a selectable bass boost
  • It is very easy to install
  • It comes with a surface-mount PCB (print circuit board)

Drawbacks:

  • It relatively expensive, especially for those with a tight budget
  • Though it’s powerful, it’s not as powerful as other amps within its price range
CHECK PRICE ON AMAZON

3. Sound Storm EV2500M Evolution 2500W, 2Ohm Stable Class A/B Amplifier

This amp is specially designed to feed your sub with solid bass. It features a classic and simple design that makes it very easy to install.

This Monoblock Class A/B power plant amp produces a 2500W MAX at 2 Ohms, a 1875W RMS at 2 Ohms, and a 1250W MAX at 4 Ohms. It comes with Preamp RCA and high- and low-level inputs.

It has a MOSFET system that will make your sub produce powerful sounds with ease, a switchable input sensitivity, a variable input gain control, a variable low-pass crossover, and a variable bass boost. All of these amazing features work together for more customization to deliver solid bass.

It comes with electrical short circuit protection that automatically shuts off the amp should in case it gets too hot or a system failure occurs. More so, this amp comes with a six-year warranty, something unusual with most other amps. Don’t hesitate to boost the bass on your sub with this amp.

Benefits:

  • It features selectable input sensitivity
  • It has 2Ohm Stable and High- and Low-level Inputs
  • It features Variable Bass Boost and Variable Input Control
  • If features electrical short circuit protection
  • It has a variable low-pass crossover

Drawbacks:

  • It isn’t the best for prolonged playtimes
  • It can sometimes sound very weak at high volume
CHECK PRICE ON AMAZON

4.  Pioneer GM-A3702 2-Channel Bridgeable Amplifier

The Pioneer GM-A3702 is a well-known amp for MTX Terminator Subs due to its affordability. Despite being a pocket-friendly amp, the Pioneer GM-A3702 is built with flexibility and functionality in mind. It is compact, easy to install, and wouldn’t take up lots of space.

This amp comes with 500W MAX power at 2Ohms and 60W RMS at 2Ohms. It boasts of an automatic signal sensing feature that automatically detects an incoming sound signal and turns on the amp. This saves you the need to manually turn the amp on or off.

Unlike most other amps, this amp is bridgeable. That means it can be bridged at 4Ohms to get a 190W RMS power output from a single channel. The Pioneer GM-A3702 has a wide frequency range of about 10Hz to 70kHz. It also has a balanced isolator input circuit and a Hi-volt input level control.

If you need a powerful, clear-sounding, and very affordable amp for your sub, you can’t go wrong with this Pioneer GM-A3702.

Benefits:

  • It has automatic signal sensing and turn-on
  • It features electrical short circuit protection
  • It has a balanced isolator input circuit
  • It has Hi-Volt input level control
  • It is easy to install
  • It is bridgeable
  • It can be connected through speaker level and low-level inputs

Drawbacks:

  • It may not be very powerful for bass lovers
  • It lacks a remote bass control
CHECK PRICE ON AMAZON

5. BOSS Audio Systems R1100M Riot Series Amplifier

The next amp on our list is the BOSS R1100M Riot Amp. It is one of the most affordable and best amps for MTX Terminator Subs. That means you’ll get the best value for your money.

 Despite its competitive price, this amp includes all the necessary inputs and features. Just like the Sound Storm EV2500M, this amp is also a Monoblock Class A/B power plant amp. It produces a 1100W Max at 2Ohms and 550W Max at 4Ohms (up to 825W RMS at 2Ohms).

It comes with a remote subwoofer control to enable you to operate your sub remotely, switchable bass boost, variable low-pass crossover, and high- and low-level inputs. It also has a MOSFET power supply system that will make your sub produce powerful sounds with ease.

It comes with Preamp RCA and low-level inputs, a subwoofer level control, and a linear circuit for improved sound quality and enhanced power output. Another amazing feature is its variable input control for adjusting the sound signals.

There is also an auto shut-off feature that automatically shuts off the amp should it heat up excessively or when an electrical short circuit occurs. This feature protects the amp from damage due to electrical short circuits or overheating. The sound quality of this amp is acceptable considering its price.

Benefits:

  • It is a MOSFET Class A/B amp
  • It features subwoofer level control
  • It comes with an Auto Shut-Off feature for protection against electrical short circuit or overheating
  • It has Low-Level Inputs
  • It features a switchable bass boost
  • It features a Variable Input Control
  • It has an illuminated BOSS logo

Drawbacks:

  • The remote bass control is a bit flimsy
CHECK PRICE ON AMAZON

6. Rockville dB14 4000w Peak/1000W RMS Mono 2Ohm Amplifier

The Rockville DB14 Amplifier is another great amp that works perfectly with MTX Terminator Subs. The brand name, Rockville, is well-known for designing high-quality sound equipment.

This Class D Mono amp delivers a 4000W MAX power and 1000W RMS MAX power output at 2Ohms.  This amp features a MOSFET power supply for maximum efficiency, a low-pass filter, a subsonic filter, and a fully adjustable 12dB/Octave crossover.

The Rockville DB14 Amplifier comes with Preamp RCA line outputs to connect to multiple amps. It comes with a bass equalizer, dashboard remote control, voltage protector, and a LED Indicator. Overall, the sound quality of the Rockville DB14 Amplifier is high and acceptable.

Benefits:

  • It features a high-speed MOSFET power supply
  • It comes with a fully-adjustable 12dB bass equalizer
  • It features a voltage protector to protect the amp from voltages below 10V and above 16V
  • It has a wide frequency response of between 15Hz to 250Hz
  • There is a LED indicator to display the current status
  • It comes with a remote dashboard subwoofer control
  • It has an illuminated Rockville logo

Drawbacks:

  • It doesn’t have gain control
  • The illuminated Rockville logo is too bright and may irritate some users
CHECK PRICE ON AMAZON

7. Skar Audio SK-M5001D Compact Monoblock Class D MOSFET Amplifier

This is a full-range four-channel amp. It’s compact yet offers sufficient power to your sub. It’s a MOSFET Class D amp, which makes it very powerful, versatile, and reliable.

It offers a 500W RMS power at 1Ohm, a wide frequency response of between 15Hz to 270Hz. It comes with 8-gauge ground input terminals and a Hi-Level input connection. The Skar Audio SK-M5001D is a great option where maximum power is required but space is limited.

This amp comes with other amazing features such as the high-level input connections where RCA connection is lacking, a protection mode, low-pass filters, gain control, and a subsonic filter.

Benefits:

  • It features a high-speed MOSFET power supply
  • It has a wide frequency response of between 15Hz to 250Hz
  • It has a gin control
  • It is easy to install
  • It can be connected through high-level inputs
  • It is very powerful, versatile, and reliable

Drawbacks:

  • It overheats. It can get too hot and go into protection mode
CHECK PRICE ON AMAZON

8. Planet Audio PL1500.1M Monoblock Car Amplifier

This is undoubtedly a very powerful amp for MTX Terminator Subs. It is more powerful than most other amps out there. It comes with a maximum power rating of 750W at 4Ohms and 1500W at 2Ohms. Isn’t that truly powerful? It also features a 1125W RMS at 2Ohms and 563W RMS at 4Ohms.

The Planet Audio PL1500.1M is a MOSFET Class A/B amplifier. This means it delivers high-quality sound with the highest efficiency. This amp minimizes distortion with its special linear circuit.

Also, the Planet Audio PL1500.1M comes loaded with top features, such as speaker-level and line-level inputs, variable gain control, protection mode, and switchable input sensitivity.

The speaker-level and line-level inputs ensure that the amp can be connected either to the speaker outputs or to the preamp/RCA outputs of the head unit. The variable gain control is for balancing output. The protection mode automatically turns off the amp during overheating or in the case of an electrical short circuit. The switchable input sensitivity ensures that the amplifier gets to its max output irrespective of how weak or strong the input signal is.

If you need an amp that will enable you to turn up your sub to the maximum and leave it like that for a long time without getting overheated, the Planet Audio PL1500.1M may be the right amp for you.

Benefits:

  • It features a MOSFET for maximum efficiency
  • It can be connected through speaker level and low-level inputs
  • It features a variable gain control
  • If features electrical short circuit protection
  • It has a wide frequency response of about 9Hz to 250kHz
  • It features a low-pass filter to eliminate undesired frequencies

Drawbacks:

  • The remote bass control is not very reliable
CHECK PRICE ON AMAZON

9. MTX MUD100.4 Mud Series 400W RMS 4 Channel Class D Amplifier

This is another amp from the same maker of the Terminator Subs – MTX itself. So, you should expect this amp to not only fit well but also perform excellently. It is powerful yet compact and can be installed in small places.

This is a Class D amp that produces a 400W RMS power at 4 Channels. It can also deliver 100W of RMS power at each channel. This amp has a well-built input system that ensures that the amp can be connected either to the speaker outputs or to the preamp/RCA outputs of the head unit.

It comes with a switchable bass boost and fixed high and low pass crossovers. An amazing feature is its weatherproof design, which protects the amp from circuit deterioration and corrosion in salty or moist conditions.

For quick and easy connections, this amp comes with a pigtail that contains all of the necessary wiring connections.

Benefits:

  • It is very compact
  • It features a weatherproof design that makes it more durable.
  • It features high- and low-pass crossovers.
  • It features a convenient pigtail connection
  • Has a well-built input system
  • It is bridgeable

Drawbacks:

  • It lacks gain control
CHECK PRICE ON AMAZON

10. BOSS Audio Systems R3004 4 Channel Car Amplifier

The last amp on our list of the best amps for MTX Terminator Subs is the BOSS Audio Systems R3004. It is one of the most budget-friendly amps for MTX Terminator Subs. It has a total peak power of 1200W – a max power of 300W at 2Ohms and 150W at 4Ohms at its four channels.

Since this amp is bridgeable, max power of 600W at 4Ohms can be achieved when bridged. The BOSS Audio Systems R3004 is a MOSFET Class A/B full-range amplifier.

This amp comes loaded with top features, such as high-and low-level line inputs, variable gain control, variable bass boost, fixed high-pass crossovers, and protection mode.

The high-and low-level line inputs ensure that the amp can be connected either to the speaker outputs or to the preamp/RCA outputs of the head unit. The variable gain control is for balancing output.

The variable bass boost controls the exact amount of bass the sub should produce. The protection mode automatically turns off the amp during overheating or in the case of an electrical short circuit.

Benefits:

  • It features a MOSFET for maximum efficiency
  • It features high-and low-level line inputs
  • It features a variable gain control
  • If features electrical short circuit protection
  • It features a fixed high-pass crossover
  • It has an illuminated BOSS logo

Drawbacks:

  • It has bad mounting screws
CHECK PRICE ON AMAZON

How to Choose the Best Amp for MTX Terminator Subs

Are you thinking of purchasing a new amp for your MTX Terminator Sub? Although there is no one-size-fits-all amp for all MTX Terminator Subs, the guide below will help you make the right choice. To choose the best amp, consider the following:

The Power Rating of the Amp

This is usually the first factor to consider because it determines how much power the amp will feed to your MTX Terminator Sub.

Some amps come with the Max/Peak power rating and the RMS power rating. Consider the RMS power rating more because this is the continuous power that the amplifier sends to your sub.

Whereas, the Max/Peak power rating represents the max power that an amp can get to in short bursts. Make sure that you choose an amp with enough RMS power to feed your sub.

The Protection System of the Amp

This is equally as important as the power rating of the amp. Amplifying sound signals and feeding your sub with sufficient power is great work for amps.

They tend to overheat while doing this. To protect the amp, your sub, your car, and yourself, some amps come with a protection system.

The protection system automatically shuts down the amp once it overheats and turns the amp on once it’s cool. Some amps also have protection against electrical short circuits and under- and over-voltage, which include being fused and having a grounding option.

Make sure that the amp you’re choosing has a good protection system for your safety.

The Remote Bass Control Feature

While this feature isn’t compulsory, it’s very helpful, especially while driving.

The remote bass control enables you to easily control the bass output of the amp from wherever you mount the remote without the need to reach the amp itself.

The Build Quality of the Amp

The build quality of the amp determines the compactness and durability of the amp. A compact amp will require less space as you can easily install it in small places.

An amp with a strong casing and durable components will serve you better and last longer, giving you the best value for your money.

The Frequency Response Range of the Amp

The frequency response range is another important consideration when choosing an amp. This determines the sound frequencies the amp can amplify and the kind of bass response you’ll get.

It’s advisable to choose an amp with the frequency response range that gives you your preferred bass response.

The Availability of a LED Indicator

This feature is also not so important but it’s very useful. It displays necessary info and saves you from unnecessary guesses.

A LED indicator indicates the current mode of the amp, such as Power ON/OFF, Protection Mode, and so on. Every good amp should have a LED indicator.

Final Verdict

As a music enthusiast with a passion for intense bass, you know the importance of having an MTX Terminator sub in your car. The next best decision is investing in the best amp for your sub for outstanding bass performance.

That’s why we’ve compiled a list of the best amps for MTX Terminator Subs and reviewed them in the post above. Hopefully, our post has helped you to make the right choice.

Leave a Comment