If you’ve ever had the unfortunate experience of getting your car audio sytem wet, you know how frustrating it can be.
Not only does it stop you from being able to listen to your favorite tunes, but it can also cause some serious damage.
In this blog post, we will discuss some tips on how to fix a car radio that got wet. Keep reading for more information!
How to Fix a Car Stereo that Got Wet?
One of the first things you should do is turn off the power to the stereo. This will help prevent any further damage from occurring.
Once the power is off, remove any detachable parts of the stereo including faceplates and knobs.
These parts can usually be cleaned with a soft microfiber cloth. Be sure to dry them thoroughly before moving on.
If the faceplate or knobs are not detachable, you can use a soft microfiber cloth to gently wipe them down.
Next, you’ll need to remove the stereo from the dash. This will give you better access to all of the components.
Once the stereo is removed, inspect it for any water damage. If you see any corrosion or rust, this is an indication that there may have been any moisture or water-borne issues before.
However, there won’t be any rust or corrosion right away after you spill water on the stereo. Instead, look for a water damage indicator inside the system. In some devices, a white round material is placed inside the system which turns red, pink, or purple if any liquid gets in touch with it.
If the damage isn’t too severe, you can try cleaning the components with rubbing alcohol. This will help remove any water residue and prevent further damage.
After you are done mopping the water off the wet areas, you can simply use a hairdryer or heat gun at very low settings to dry out any remaining moisture.
Once everything is clean and dry, reassemble the stereo and test it out. With any luck, it should be working like new!
If you’ve followed these steps and your stereo still isn’t working, it’s possible that there is more serious damage. In this case, it’s best to consult a professional for help.
How to Fix a Car Speaker Set that Got Wet?
If your car speaker set got wet, there are a few things you can do to try and fix it.
First, if the unit is still wet, try and remove as much water as possible by blotting it with a dry cloth or using a vacuum cleaner with the hose attachment.
Then, let the unit air dry for 24 hours before attempting to use it again. If the unit does not seem to be working after this time period, you may need to take it to a professional for repair.
While performing the fix, make sure to remove the unit from the door or dashboard position and keep it in a dry and warm place where there is enough room for it to dry out.
Carefully look into the cones, connectors, and coated areas to see if there was any damage to them. You shouldn’t try to rerun them yourself unless everything is completely dry and moisture-free.
How to Fix Car Amplifier that Got Wet?
The best way to fix a car amplifier that got wet is by taking it to a professional.
However, if you’re feeling brave and want to try fixing it yourself, the first thing you’ll need to do is remove any water from the unit.
This can be done by unscrewing the unit to remove the outer shell and drain out any water from the inside. Once all of the water has been removed, let the amplifier air dry for 24 hours before attempting to use it again.
You shouldn’t try to mope the amplifier interior as there are many circuits and critical components inside that may get damaged while you try wiping. You can use the hairdryer method described above to get rid of the moisture from inside the car amp.
Although professionals will use a heat gun, we don’t recommend using a heat gun on the car amp as things can go south pretty quickly if you go slightly above the heat limit.
How do Car Stereos Get Wet?
Car stereos can get wet for a number of reasons.
The most common reason is condensation, which can happen when the temperature inside your car changes rapidly. This can happen if you leave your car in the sun on a hot day, and then turn on the air conditioning when you get in.
Another way that car stereos can get wet is from spills. If you spill something inside your car, it could easily splash onto your stereo.
Another rare reason can be floods or other natural disasters that may hit your area and your car gets fully sunk under the water without proper door and window seal. Proper door and window seals won’t be enough if the flood is too aggressive.
How to Prevent Car Stereo Systems from Getting Water Damaged?
Water and electronics don’t mix. That’s why it’s important to take precautions against water damage when using a car stereo system. Here are some tips on how to prevent your car stereo from getting wet:
Keep Doors and Windows Shut
Keep your car doors and windows closed when driving in bad weather. This will help keep water out of your car and prevent your stereo from getting wet.
Ensure Perfect Seal
If you must drive in the rain, make sure that the window and door seals are perfect. Letting water in the car can increase the risk of moisture condensation inside the car which may result in water damage to crucial interior components.
Car Speaker Baffles
If you want to keep your car stereo system safe from water damage, consider installing car speaker baffles. Baffles are installed over the speakers and help deflect water away from them.
Beware of Puddles
Be careful when driving through puddles. Puddles can hide large rocks or other objects that can damage your car’s underside.
If you hit a large object in a puddle, it can cause a hole in your car’s bottom which will let water in and damage interior components in regular rainy weather.
Conclusion
Water damage is uncommon in car audio setup as these things are not easily accessible from outside and are generally well protected.
But, in case your car stereo system got wet, follow the above-mentioned steps to ensure its longevity. Taking proper precautions can help you avoid water damage to your car stereo in the future.
I hope this article was helpful. If you have any questions or comments, please feel free to leave them below. Thanks for reading!
